ENERGETIC ARMAMENT VOX K2 SILENCER

VOX: Latin for voice. The voice of your gun- Raise your standards and lower your voice the Vox K2 represents the next evolution of the Vox line of Energetic Armament silencers. The Vox K2 is a next generation ‘kurtz’ compact silencer for shooters that require a hard use, high temperature silencer that is light and compact. Engineering efficiency is at the core of the Vox K2 continues the feature rich tradition of the Vox line with a laser welded & nitrided C300 nickel-cobalt superalloy core. Industry standard 1.375×24 ‘HUB’ pattern mount allows shooters access to a wide array of mounting options in addition to the removeable direct thread adapter that ships with the silencer. The industry-first wipe cap is standard equipment and allows the shooter to use the silencer with or without the wipe depending on what suits their needs. The new Vox K2 accepts our accessory flash hider end caps
available in both 7.62mm and 5.56mm.

The Vox K2 ships standard with a combination cap/mount spanner and our Vox Blox vise block so you are ready to go right out of the box. The Vox K2 features the Energetic Armament patented Serial ID ring that is standard on all EA centerfire silencers. This patented ID ring ensures best-in-industry support should anything happen to your silencer such as a baffle strike. Our lifetime warranty makes sure you are covered and warranty re-cores are handled with same-day turn around rather than weeks or months with other companies.

The data shown in the above graph is taken from Metallic Materials Properties development and Standardization (MMPDS) which is the US Federal standard for metallic materials properties. This standard is used for DoD (Formerly Mil-Handbook-5), FAA and NASA for flight critical design and procurement. This represents statistically validated maintaining a small outer envelope. More internal volume = better sound attenuation.

The VOX™ is compatible with all industry standard quick-disconnect mounting systems including the Q™ Plan-B™, Dead Air™ KEY-MO™ (DA428), Silencer Co.™ ASR™ and others. This allows the operator to use the muzzle devices they already have and makes swapping your VOX™ between guns very simple and convenient.

The end cap of the VOX-K2™ is removable and features a wipe holder as standard equipment. A high temperature rated silicone wipe provides ultra-quiet sound performance when using sub-sonic rounds. The wipe forms a seal to the exiting bullet to control gas flow and bring the ultimate quiet to your shot. The wipe is easily removed for heavy supersonic, high power shooting is needed. The VOX is quiet… really quiet… with low, even tone that
gives your rifle the voice you want.

Standard Wipe Cap Nose. Direct thread & third party mount friendly.

KEY VOX K2 SILENCER SPECIFICATIONS

Assembled Weight:
10.4oz (295 g) – VOX K2 Direct Thread w/ wipe
-0.4oz (-11 g) – Remove silicone wipe & retainer
Length:
4.9 in. (124 mm) x 1.55 in. (39.4mm) Dia.*- VOX K2 Direct Thread
*Max dia at Serial ID ring; core dia. 1.5″ (38mm)
Material:
Welded Core- Heat Treated C300 Nickel-Cobalt Maraging Alloy US origin, DFAR
certified
End cap – 17-4 H1150 Stainless US origin, DFAR certified
DT adapter- 6AlV4 Titanium (Gr. 5) US origin, DFAR certified

Mounting:
Compatible with industry standard HUB mount threads (1.375-24)
5/8-24 RH Standard Direct Thread (included)
1/2-28 RH Optional Direct Thread (SKU EA22)
Dead Air™ Key-MO™
SilencerCo.™ ASR™
Q ™ Plan-B™
And most other industry standard HUB mounts
End Cap:
Flat 7.62mm Standard Wipe Cap (included)
Flat 5.56mm Optional Cap (SKU EA33)
Flash Hider 7.62mm Optional Cap (SKU EA39)
Flash Hider 5.56mm Optional Cap (SKU EA38)
Rating:
7.62mm / .30cal bore
5.56mm / 308WIN / 300BLK Full Auto
300WM / 300RUM
No barrel length restrictions
Design:
Welded baffle stack with removable end cap, 1-1/4 in. standard hex
Standard reconfigurable wipe nose
Interchangeable industry-standard mounts, 1.375 x 24 thread for mounts
Patented Energetic Armament Serial ID ring

WIPES:

Wipes may be replaced by a dealer or users can repair their silencers; they just can’t manufacture and stockpile silencer parts. Making and replacing wipes 1:1 is acceptable. You cannot make them for other people or have more than one at a time. The old wipe should be destroyed before a new one is made. Per BATF regulations Energetic Armament does not sell replacement wipes. This guide DOES NOT constitute legal advice and firearms laws change regularly. Please consult your dealer or an attorney for guidance with all laws and regulations.

WHAT’S IN THE BOX:
VOX™ Silencer w/ 5/8-24 direct thread adapter
Wrench multi-tool (mount spanner & 1-1/4 hex for end cap)
VOX Blox™ vise block
Packet of anti-seize
Instruction manual
Decals

Dead Air™ and Key-MO™ are trademarks of Dead Air Armament, SilencerCo.™ , Omega™ and ASR™ are trademarks of SilencerCo, LLC

Discover more premium firearm parts and accessories at Centerfire Reserve.

Trusted Resources

Google |
Bing |
DuckDuckGo